Blog

Replacing model gratings – a delicate operation

17 September 2013 by Sam

detail of ship model deck with missing part

Detail of hatchway, showing the missing grating.

Ship and historic models conservator David Parsons has news of a very delicate piece  of conservation work that he has been working on:

“Oceanic 2 was built for the White Star Line by Harland & Wolff in 1899, it was commissioned as a merchant-cruiser in the First World War but sank soon after.

I’ve been working on the conservation of the builder’s model of Oceanic 2 for some time now and I’m getting towards finishing it. One of the early decisions I made was to leave the most complicated parts until last, and one of the most complicated things was replacing missing gratings.

detail of very fine lengths of wood being glued together to form a tiny grid

After being cut to the right size and carefully lined up the lengths of wood were glued together to form a grid.

There should have been three hatchways with gratings, one in each of the three well-decks, but two hatchways each had one grating missing and the third hatchway was missing altogether.

The model was made to 1/64 scale so the gratings were made to this scale – the wood used was 1mm wide and so were the holes. The makers would have used box-wood or something similar because it has a very fine and tight grain. I used ‘Degama’ which is an African version of box-wood.

To make the gratings I prepared lengths of wood in two sizes: 1mm x 1mm and 1mm x 2mm. The 1mm x 2mm pieces were held in a cutting guide and cuts were made at 1mm intervals using a tenon saw with a 1mm wide blade, being careful to only cut down by about 1mm.

detail of conserved hatchway on the deck of the model ship

The finished grating in place in the hatchway. To give an idea of the size, the black and white scale at the bottom is of centimeters.

The slotted 1mm x 2mm pieces were spaced apart by 1mm with pieces of the 1mm x 1mm wood, taking care to line up all of the slots, 1mm x 1mm lengths were then glued into the slots. The lattices formed were cut to size and their tops were flattened using a chisel and glasspaper. The grating panels were stained to match and varnished before being glued in place.”

  1. mel catchpole says:

    maybe squeeze a good quality Dorset tea bag on it to make it blend in colour wise ,marks out of 10 ——–9.9 fantastic job so pleasing to see such craftsman ship still exists

    • David Parsons says:

      Well thanks for that, it is actually quite a good colour match but it’s difficult sometimes to get the light right. Oceanic should go on display at the Maritime Museum next year so you can have a proper look then!
      Dave.

  2. […] 2 before it goes on display at Merseyside Maritime Museum next year, as you may remember from his previous blog post.  Here is his latest update on […]

(Comments are closed for this post.)

About our blog

Welcome to the National Museums Liverpool blog! Written by our staff and volunteers, we’ll give you a peek behind the scenes of our museums and galleries.

Award-winning blog

corpcomms awards winner logo

Subscribe

RSS RSS Feed

Disclaimer

We try to ensure that the information provided on our blog is accurate and that appropriate permissions to use images have been sought. The opinions in each blog are very much those of the individuals writing.